I built a smart host for Enhance CP, does anyone want to test?: Page 2 - Enhance Control Panel

I built a smart host for Enhance CP, does anyone want to test?

PDudeP

Yes! I'd love to try!
Please, let me know what I need to do.
Thanks!

AdamM

PDudeP Can you write to my email and send your server/servers IP? adammakowski.dev@gmail.com
I will tell you how to configure everything

PDudeP

AdamM thanks! Later today I'll send you the email. I'll move a website to one server and make the changes.
Regards,
Luis

AdamM

Maybe tomorrow I will write instructions for everyone and whoever wants to can test, IP verification will be needed from my side anyway.

AdamM

If one wants to test the email delivery service one should do it first:

It's best if you test first some SMTP for only one site from this server. Example using WP Mail SMTP plugin.
For this domain, you need to add and change 2 DNS records:

To TXT please add or edit: include:spf.dynoble.network
Example: v=spf1 a mx include:spf.dynoble.network ~all
Add new TXT DKIM key dns record
Hostname: smarthost-dynoble._domainkey
Value: "v=DKIM1; h=sha256; k=rsa; ""p=MIIBIjANBgkqhkiG9w0BAQEFAAOCAQ8AMIIBCgKCAQEAzgRJ5vCi7HI6qBtTxq+KDBi73biy93Ns6vHwca0skwS22sG95NgyhWG4ztptbtsiTwJ+bsoI2W6XbwboKmESyBYDvAcCL4Dmx4iSfP8CW+CQNNdZ7fIxi4T32HlfNVLXArl8c847mw1Sz1xECewcCq+E9zqpHGeWp23OZGmjTWcbwzh2dKZoYmWOFxpp3ahsnvuAY5Js516gNU""SAgEEnK6MS/wR0sEvpFyKkcW1iAb7TsWRIj+GYDeAOV7mvWh2kJse7D4PYaySKRsp7TFabN9gG2KGHz+8m48wXcrkaz9xrtkUMLGnaOWKixVROlGO8CTvxMwW1013ZpLUKKoDLVQIDAQAB"
It is also recommended to add dmarc to better email delivery
Example:
Hostname: _dmarc
Value: v=DMARC1; p=none;

After these operations you can test SMTP using the access data:
Hostname: smarthost.dynoble.network
Port: 587
User: without giving any data
Password: without giving any data

Important! In order for mail delivery to work it is not enough to add DNS records, I also need to add the IP of that server where the site/sites is to the whitelist of my services. You need to send me the IP, preferably to email - adammakowski.dev@gmail.com

To use smart host in Enhance each domain on the server must have DNS records added.

Wwarrior

AdamM Where do I get the code for DKIMP?

AdamM

Wwarrior Given in point 2, you must use it.

"v=DKIM1; h=sha256; k=rsa; ""p=MIIBIjANBgkqhkiG9w0BAQEFAAOCAQ8AMIIBCgKCAQEAzgRJ5vCi7HI6qBtTxq+KDBi73biy93Ns6vHwca0skwS22sG95NgyhWG4ztptbtsiTwJ+bsoI2W6XbwboKmESyBYDvAcCL4Dmx4iSfP8CW+CQNNdZ7fIxi4T32HlfNVLXArl8c847mw1Sz1xECewcCq+E9zqpHGeWp23OZGmjTWcbwzh2dKZoYmWOFxpp3ahsnvuAY5Js516gNU""SAgEEnK6MS/wR0sEvpFyKkcW1iAb7TsWRIj+GYDeAOV7mvWh2kJse7D4PYaySKRsp7TFabN9gG2KGHz+8m48wXcrkaz9xrtkUMLGnaOWKixVROlGO8CTvxMwW1013ZpLUKKoDLVQIDAQAB"

Copy it together with the “ at the beginning and the end.

plat

I would like to test. What should i do?

AdamM

plat I wrote the instructions above

PDudeP

Hi, @AdamM

I just configured on of my server to use your server as smarthost.
Email is just being sent to gmail and hotmail without any problems!
I'll use it and do some more tests during next week.

But for now, just working perfect!

Thanks,
Luis

AdamM

PDudeP
Great, I'm very happy ☺

nqnoc

AdamM With Microsoft accounts are you getting into spam or inbox? My setup works well except for Microsoft accounts where first emails getting into spam is usual.

AdamM

I will decide to extend the tests until the end of October.

AdamM

nqnoc If you have an email address at Microsoft you can provide then I will send a test email, there should be no problem.

AdamM

Unfortunately I can no longer edit my message with instructions, but to use smart host you just need to add hostname and port, if your server IP is added to whitelist my mail gateway will work for every domain on that server. Of course, DNS records must also be set for each site.

PDudeP

That's what I did. 😉

AdamM

PDudeP Great. I encourage you to send more e-mails and test! 😃

nqnoc

@AdamM
Hi. With your Relay/Smarthost, how does DKIM signing works? I mean will sent emails be signed by my own domains DKIM or emails sent are always signed by your own Relay/Smarthost domain DKIM?
Thanks

AdamM

You can also use the Enhance DKIM key at the same time, although if you want to always send via smart host you must configure the DKIM I indicated in the instructions.

nqnoc

AdamM

Ok. Lets see if I understoud correctly:

If a domain on Enhance already has the default DKIM we will also need to add your smarthost dkim to the domain.

Domain will then have 2 DKIM but ONLY your DKIM will be used when sending using your smarthost.

Even not being used, the default Enhance DKIM can be leaved on the DNS, since that does not cause issues.

Until here Im correct? If yes, seems your smarthost works as intended and in a good way!

Also, is there any way when sending using your smarthost the email is signed using Enhance default DKIM?

Thanks!

« Previous Page